Procut-Milling Burr 6 x 60 / 18 mm

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The approx. 1.5 m long, flexible vehicle opening tool is designed in such a way that its hooked end mimics finger movements when pulling levers and flipping rockers. The other end of the tool is formed into a handle.The bright colored tips facilitate working inside dark interiors. The robust body makes this a very durable tool in comparison to many other similar car openers. 

BLUE-TEC: The new generation of milling burrs especially for locksmiths Better, cheaper and only at Multipick at Top prices - new milling burrs for locksmiths with patent BLUE-TEC coating! Unique lifetimes and performance in all kinds of steel; you will only find this with BLUE-TEC coated milling burrs! And those are available at Multipick, the supplier for locksmiths and more. The particularly efficient grinding and sliding quality of these burrs allow optimal working. Try by yourself! Multipick is able to offer these high quality burrs at a top price! You won’t find Blue-Tec coated millings burrs anywhere at a better price! The unbeatable advantages of the new Blue-Tec milling burrs:Optimised front side + reflexion polishCylindrical shapeMilling burrs especially for LocksmithsMICRO-GRAIN hard metalBLUE-TEC - coatedMade in Germany by KarnaschOnly here at Top-Price! Think milling bits? - Think Multipick! Blue-Tec milling burrs with HP-3 gearing, especially and ideally suited for Locksmiths!High cutting action through cross cutting stylesmooth operationshort chips For use on all ferrous materials such as:cast ironsteel < 60 HRCstainless steel (INOX)nickel basis and titanium alloyAlso copper, brass, bronze Conclusion: The best cutting style for the locksmith!! 

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18,0 mm d2: 6.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

This 23cm long lever with its massive body is suited to the careful levering of car doors. The hardened plastic material minimizes the risk of scratching paintwork, any chrome parts or damaging any rubber seals.