Procut-Mini Milling Burr 3 x 60 / 15 mm

The Plain Burr 50 mm from Soubertools is a milling burr specially designed for opening locks made of brass, steel and aluminium. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services. Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 20.0 mm d2: 3.0 mm I2: 80 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The revolutionary new Universal-PRO cutting style  Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Shank: 6 mmTotal length: 50 mmCutting length: 18 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut. 

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 8.0 mm d2: 3.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan  

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left