QA Pro 2 Kit

The handle makes working much more comfortable and protects against injuries inside the hand by the edges of the opening cards. Assembling is easy: with a simple paper punch the card can be punched and fitted like a sandwich between the two handle parts the two crosshead screws and their counter nuts. 

This simple and very useful tool allows the user to pull down the door handle on the other side of the door. The Door Handle-Catch is simply inserted in the gap between door and floor, then lifted up and adjusted above (around) the door handle. Using the pulling-rope on the outside, the handle is then pushed down.  In many cases this is the easiest and fastest method of opening closed but unlocked doors. A necessary precondition for the successful use of the handle-catch is a sufficiently wide gap (at least 4.0 mm) between door and floor or a door-strip that can be removed to create a sufficiently wide gap. The door handle catch can also be used with double rebate doors.In combination with the Door Handle Catch, the Air-Wedge can be very efficient. Length of pulling rope: approx. 110 cm.The door handle catch can also be used with double rebate doors. 

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

This solid carbide high-speed drill of the latest generation is made of 100% carbide. It is the top product for cylinder openings in record time, and distinguishes itself in a high durability. For best results use a milling machine. Even with a drilling machine or a cordless screwdriver this cutting burr gives conspicuous service. In connexion with our high-performance grinding bits the user obtains an almost perfect and durable tool combination! With this drill the cylinder will be cut straight in very short time, no matter what kind of drilling protection you may find. Normally the cylinder should be possible to open by now. If it does not, you enlarge the existing whole sidewards with a grinding bit. Since this way of proceeding spares the tooth system of the grinding bit and besides is fast and efficient, we consider this combination of drill grinding bit and grinding bit as an ideal supplementOn top of our high performance cutting burrs a "must" for the equipment of every locksmith! Technical Data:Shaft-Ø: 6 mmLength: 60 mmCutting Length: 30 mm100% CarbideVery Long DurabilityBlue-Tec coated 

The kit for quick deployment! We have focused on the essentials and offer in this handy kit only the tools that a locksmith, and also a janitor, urgently needs for pulling the core as well as to snap off a cylinder from the bridge where the retaining screw is located.The tension rod is equipped with a hardened trapezoidal thread that enables precise operation and improved load bearing. Compared to the conventional fine thread, this new thread is more durable and allows faster and more precise operation without losing any torque due to the greater thread pitch. Furthermore, the rougher trapezoidal thread is less susceptible to brass shavings. If you should ever need spare parts, just give us a call! We constantly have all spare parts in stock.On top of the bell lock puller with all the necessary working tools, you also get 50 V-PRO pull screws with diameters of 4.2 - 4.8 and 5.5 mm and a G100 profile cylinder 30 / 30 for restoring the closing mechanism of the affected door.Also included is a universal magnetic bit holder for easier threading of the screw with a cordless drill.In our video library we offer you 3 different video tutorials as a free bonus to our online full versions. Just scan one of the QR codes on the leaflet inside the case.Care instructions for Multipick Bell (Please pay attention to these instructions!) Just like any other tool, our lock puller "Multipick Bell" also requires care. This means that the ball bearing and the tension rod as well as all moving parts should be kept free of metal shavings after each use and regularly treated with lubricating grease. You can either apply it by means of a brush or, alternatively, using a similar spray grease.