ELITE G-Pro Community Dimple Pick-03 (L2)

The Multipick ELITE G-PRO Community Single Pick 06 R2 combines the proven finely polished R2 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The R2 pick is designed for:Right-oriented flag: the working surface of the tip is intended for situations where a right-sided approach inside the keyway is preferred or required.Flag width 2.00 mm: this balanced and slightly more stable contact surface is ideal when a secure point of contact is desired and the tip should remain steady during pin placement, especially in dimples that benefit from a clearly defined contact area.Flag length 2.00 mm: this length provides additional reach and control when accessing dimples precisely, without the flag feeling too short or overly sensitive during use.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a neutral, direct approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 2.00 mmFlag width: 2.00 mmFlag offset: 0.00 mmFlag orientation: rightBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The “Short Thin Flat Flag” individual pick was developed exclusively for Multipick in collaboration with renowned lockpicking influencer Lock Noob. The tool features a unidirectional, flat flag profile with a deliberately shortened design. This makes the pick particularly well suited to smaller dimple locks.Its key feature is the compact working geometry: the flag is shorter than conventional Flat Flags, allowing it to be positioned much more effectively in smaller locking systems. With locks featuring a smaller profile, such as cam locks and similar cylinders, an overly long pick can quickly become an obstruction. You can get into the lock, but not necessarily where you actually need to work. This is where the Short Thin Flat Flag really comes into its own.With the flag aligned with the shaft, the profile remains slim and direct. The pick can be guided smoothly and positioned precisely on individual pins without unnecessarily extending deep into the lock. This makes it particularly useful for smaller dimple locks where available space is limited. Thanks to its reversible design, the pick can be used equally well by left- and right-handed users, reducing the need to switch between different picks.Available here as a Community Edition with a larger, ergonomically shaped aluminium handle. This handle version was also developed in close collaboration with Lock Noob and is designed for users who prefer greater guidance and a larger grip. The larger diameter can be particularly comfortable for users with larger hands, as the pick sits more securely in the hand and allows fine movements to be controlled more precisely. The clearly marked zero position helps you keep track of the flag's orientation at all times.Specifications:Flag length: 2.0 mmFlag width: 1.5 mmFlag offset: 0.00 mmFlag orientation: left, rightPick shaft diameter: 1.15 mmShaft length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 12 L3 combines the proven finely polished L3 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The L3 pick is designed for:Left-oriented flag: the working surface of the tip is intended for situations where a left-sided approach inside the keyway is preferred or required.Flag width 1.40 to 1.60 mm: this slim, slightly tapered contact surface is especially useful in narrow keyways where a tip is needed that can pass cleanly around contours, while the slightly wider section still provides enough contact area when greater stability on the dimple is desired.Flag length 1.60 mm: this short flag remains highly controllable when space inside the keyway is limited and helps reduce the risk of unintentionally contacting guide surfaces or neighbouring pins.Flag offset 0.00 mm: the flag is positioned without offset. This is advantageous when a direct, neutral approach is preferred and the tip should be guided straight onto the pin dimple in a controlled manner.Specifications:Flag length: 1.60 mmFlag width: 1.40 to 1.60 mmFlag offset: 0.00 mmFlag orientation: leftBlade Ø: 0.85 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The Multipick ELITE G-PRO Community Single Pick 13 LR1 combines the proven finely polished LR1 flag tip with the Community Edition handle, designed for smoother and more controlled operation. The Community handles feature a larger diameter, an ergonomic shape, and a clearly visible zero-position marking, allowing you to maintain orientation at all times and work with consistent precision. This handle and flag version was developed in collaboration with Lock Noob. In addition, the aluminium handles feature a surface treatment that improves scratch resistance during everyday use.As with all ELITE G-PRO picks, feedback is the main focus here as well, featuring finely polished tips, a micro-elliptical blade shaft for a precise pivot point, slip-resistant handles, and interchangeable blades available separately.The LR1 pick is designed for:Flat flag geometry: the flag is aligned flush with the handle, creating an especially slim profile that is ideal for tight tolerances and complex keyways.Flag width 2.50 mm: this wide, flat contact surface is useful when a stable point of contact is desired for controlled pin guidance and clean pin placement.Flag length 2.00 mm: this length provides controlled reach without the tip becoming unstable inside the keyway, making it particularly suitable when precise positioning is required in confined spaces.Left and right orientation: the double-sided usability allows pins to be approached from both directions without constantly changing picks, which is especially practical for locks with multiple pin rows or varying picking angles.Specifications:Flag length: 2.00 mmFlag width: 2.50 mmFlag offset: 0.00 mmFlag orientation: left, rightBlade Ø: 1.15 mmHandle length: 95.0 mmHandle diameter: 8.0 mmOverall length: 130.0 mmWeight: 14 g 

The ELITE G-PRO Community Handle is the modular foundation of the G-PRO pickT2 system. Supplied without a pick blade, it allows you to fit exactly the tip required for your specific task. A key highlight is the direct collaboration with Lock Noob, one of the most well-known figures in the lockpicking community. This handle is therefore built on years of practical experience and expertise. Compared to the standard handle (SKU#: MP3BMP-O), the Community Edition features a thicker tip section, enabling improved force transmission. It is also slightly longer, providing a more comfortable and secure grip in hand. Its shape supports natural handling and allows for precise movements without compromising feedback from the lock. The material ensures a firm grip even during extended use, prevents slipping, and enables controlled rotation and guidance of the pick. This allows you to maintain consistent feedback on pins, spring tension, and set points at all times. Thanks to the modular design of the G-PRO system, dimple flags can be changed quickly, allowing the handle to remain a permanent part of your setup. The flag is held securely and precisely in place for reliable performance.