Latch Opener 1.5 mm double-offset

These uniquely shaped door latch levers enable quick entry through both inward and outward opening doors. The two piece set of Door Latch Lever Wires with ergonomically formed handles made out of strong synthetic material is extremely sturdy and allows the opening of closed but unlocked, single rebated doors. Engravings on the handle indicate the width of the angled wire (22 or 15 mm)and the appropriate side for doors mounted on the left or on the right (L or R). Once inserted between door and frame, slide the tool down to the latch and continue to slide the tool down while levering and the door will open. In the case of doors opening towards you insert the tool on the top with the tip pointing downwards. Here the idea is to get the tip behind the latch and push it towards you. In case you have difficulties inserting the tool because of a narrow gap between the door and frame, the Double Ended Lever will allow the widening of the gap easily.  Material: Sprin Steel Wire, Ø 3mm,filed down to 2 mmBlack handle: 22 mmGrey Handle: 15 mm 

Alternatively or complementary we offer Spring Steel Wire of high quality (approx 2200 N/mm²) for the creation (bending) of latch pick needles according to your own specifications. Often this high-quality spring steel wire also serves various other purposes in the daily work of a locksmith. 

For the easy opening of “only” closed but unlocked doors. Small, very efficient and almost indestructible set of needles. The best we know! 

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 18.0 mm d2: 6.0 mm I2: 80 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The new Latch Opener Set (2 pieces: 1x 1.5mm and 1x 1.75 mm, made of spring steel wire, with handle) is especially designed for the opening of double-offset doors. After pulling the door out of its frame for a little distance, using the Multi-Opener, Door Lever or Suction Cup etc., the appropriate latch opener is inserted into the gap and pulled up into the direction of the latch. Be careful not to rip out the sealing while doing so. When touching the latch with the tool’s tip, twist the tip of the tool against the latch and the door will open.