Milling Burr 3x50/22mm with deep frontal cuts

The Magi Burr 60 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 15.0 mm d2: 3.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal useApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The revolutionary new Universal-PRO cutting style  Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Shank: 6 mmTotal length: 50 mmCutting length: 18 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut. 

The Magi Burr 60 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 15.0 mm d2: 3.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal useApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

6-sided Cutter for drilling out tubular (radial pin tumbler) locks.  

This solid carbide milling burr 4 x 6 x 60 mm is cut off one piece. It distinguishes itself through rough drilling features, due to its deep cuts, which also leads to a good chipping removal.Special features:Due to the reduction of a 6 mm drill burr to 4 mm at the tip, working time is reduced by more than half, for less material has to be cut. A pleasant side effect: the core drawing protection doesn’t have to be destroyed thanks to the small milling burr head diameter. Technical features:Material: Solid carbide Form: cylindrical d1: 4.0 mm I1: 14.0 mm d2: 6.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The revolutionary new Universal-PRO cutting style  Up to 82% more material removal than our usual HP-3 universal cutting style. *Long tool life comes with high performance.Almost vibration-free and controlled work even under tough roughing conditions possible.Available in the latest GREEN-TEC coating technology for another significant increase in tool life. For all types of steel such as:- Cast iron- Steel <60 HRC- Stainless steel (INOX)- Nickel basis and titanium alloy- Also for copper, brass, bronzeSpecifications:Ø Shank: 6 mmTotal length: 50 mmCutting length: 18 mm * If the aggressive material removal / roughing of the new Universal-PRO cut appears too strong for you, please use our proven HP-3 universal cut.