SDB-Pick-008-3.3 for Dimple Locks - Opener

TCS-B ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the TCS-B cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the TCS-B, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

This handle is intended as an optional aid. In each of the cases 2, 3 and 4 there are 2 of these handles. The handle is used to apply more pressure during pre-tensioning (Dimple locks) and, depending on the application, it gives a better hold of the tool as well as a better feel during tensioning. A maximum of 3 handles can be attached to the tool. These are screwed into the corresponding threaded bores on the lateral surface. It is entirely up to the user to choose whether to use 1, 2 or 3 handles. Based on our experience, one handle is sufficient. Handle length V2: approx. 53mm