SDB-Pick-003-3.1 for Dimple Locks - Opener

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins.  Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. We currently offer 8 different key profiles for the corresponding cylinders. Further types are being planned. This key profile is for RW6. 

These scales are used when it comes to opening dimple locks. They are available in different graduations. The selection of a scale depends on the type of lock you want to open. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.4mm 

The different key profiles serve primarily to guide the pick, as well as to establish the pre-tension when setting the pins.  Another advantage of our profiles is that they can be removed from the lock after picking and a possible second closure can be bypassed, for example using the flip-it. Furthermore, the key profile can be used to check the function of the pins by inserting the profile on the corresponding side of the pins. Information on this can also be found in the explanatory video. We currently offer 8 different key profiles for the corresponding cylinders. Further types are being planned. This key profile is for BASI V55. 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism. The 50° angled blade ensures safe work without risk of injury to the users knuckles, since the operating hand do not rest directly on the door panel.Normally this opening technique is only possible with simple fittings which are not screwed together.