Multipick ELITE Tensioners

Welcome to the professional league The coronation of Multipick's ELITE turners This set would be Lock Noob's choice if he were to put together a set from the 52 turners we have in our portfolio. So, taking his advice, we have introduced our Multipick ELITE Tension Set 3 to the Locksport community. As one would expect, the 16 tensioners are all made out of high-quality steel and provide an excellent feedback during picking due to their flexibility and hardness. The various forms and lengths allow a wide range of opening possibilities and comes in a handy genuine leather case. The ultimate tensioner set in worldwide unrivalled high-tech quality.High-quality individual design - perfection down to the last detailNo duplicate turners30 years warranty if used properly100% Made in Germany - Made in Bonn - by Multipick of course. 

The new generation of spring loaded round tension ringsA development with high utility value To Pick or manipulate a cylinder, the cylinder core needs to be under gentle tension to be turned. On one hand while working with an electric pick, one mainly favours the possibility of a quick change of the tension direction. On the other hand manual pickers prefer a continuous turning tension in one direction. The new and high precisely produced semi- automatic tension ring TNT-20-V3 simplifies the whole work. The tension to the left and right side can be applicate fine and gentle, thanks to its extravagant production, and enables effortless use, thanks to its handle geometry The TNT-20-V3 is the only tensioner worldwide with the possibility to adapt to various different cylinders due to the quick and tool-less but exact change of the lower tension pin. Exchange pins for straight, left-sided and right-sided curved cylinder profiles are included in delivery.  The TNT-20-V3 is absolutely recommendable for both beginner and professionals, for manual picking and picking with electric picks. Outstanding abilities and improvements compared to the preceding models:Highly precise  fine-mechanic production from Germany (not to be compared with products from Asia or USA)New handle geometry enables sensitive and effortless tension to both sides.Tool-less changing of the tension pins for straight, left-sided and right-sided curved cylinder profiles for optimal and quick adjustment to all types of cylinders. Multipick TNT-20-V3 Intelligent and precise fine-mechanic "Made in Germany" by ©Multipick 

Designed by Lock Noob Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers. This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Multipick ELITE Dimple Lock Tensioner SP-62 - 1.3 x 2.5 mm Dimensions:Shank width: 2.5 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-63 - 1.3 x 3.0 mm Dimensions:Shank width: 3.0 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-64 - 1.3 x 4.0 mm Dimensions:Shank width: 4.0 mmThickness: 1.3 mm Multipick ELITE Dimple Lock Tensioner SP-65 - 1.5 x 2.5 mm Dimensions:Shank width: 2.5 mmThickness: 1.5 mm Multipick ELITE Dimple Lock Tensioner SP-66 - 1.5 x 3.0 mm  Dimensions:Shank width: 3.0 mmThickness: 1.5 mm Multipick ELITE Dimple Lock Tensioner SP-67 - 1.5 x 4.0 mm Dimensions:Shank width: 4.0 mmThickness: 1.5 mm A product of Multipick "Made in Germany - Made in Bonn". 

The special ELITE Top of the Keyway (TOK) Prybar Wrench Set 2 from Multipick is a combination of flat tension bars and heavy bars.All seven tensioners are made of high-quality steel and provide very good feedback when picking, due to their flexibility and hardness. The different shapes and lengths offer a wide range of opening options.The first three tools in the set are flat tension bars (SP11 to SP13, see pictures) offer a type of control that is often required, depending on the shape and condition of the lock. Some of them have teeth that are designed to increase the grip on the lock core.The four heavy bars (SP14 to SP17, see pictures) are designed for perfect tension control of the lock core. As with all types of tensioners that might be used for a specific lock, the following rule still applies: the closer the fit, the more control you will have over the lock core. Better control increases the frequency of feedback and facilitates minor adjustments.MP3SP11 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min 2.4 mm + max. 2.8 mmThickness: 0.6 mmTotal length: 76 mmWeight: 2 gMP3SP12 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 0.8 mmTotal length: 76 mmWeight: 2.5 gMP3SP13 Doublesided tension toolTechnical data:Side length: 4.7 mm + 11 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.0 mmTotal length: 76 mmWeight: 2.5 gMP3SP14 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 2.4 mm + max. 2.8 mmThickness: 1.2 mmTotal length: 76 mmWeight: 3.5 gMP3SP15 Doublesided tension toolTechnical data:Side length: 4.5 mm + 10.8 mmWidth: min. 3.9 mm + max. 4.2 mmThickness: 0.7 mmTotal length: 75.9 mmWeight: 2.0 gMP3SP16 Doublesided tension toolTechnical data:Side length: : 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 0.8 mmTotal length: 76.2 mmWeight: 2.5 gMP3SP17 Doublesided tension toolTechnical data:Side length: 5.6 mm + 11.8 mmWidth: min. 2.9 mm + max. 3.3 mmThickness: 1.2 mmTotal length: 76.2 mmWeight: 3.5 g Dimensions: 52 x 145 x 14 mmThis set is the perfect companion to our already "legendary" ELITE picks. 

From now on, our ELITE tension wrench range is also available in a practical 8-piece set. Be well-prepared for every type of cylinder, from the outset. These eight tension wrenches are all made of high-quality steel and, thanks to their flexibility and hardness, these tensioners provide a very good feedback when picking locks. The varying shapes and lengths offer a wide range of possibilities for a successful opening. These tension tools are the perfect complement to our already "legendary" ELITE lock picks.The tension wrenches are stored and protected in a case made of the finest cowhide.Dimensions: 52 x 145 x 14 mm 

From now on, our ELITE tension wrench range is also available in a practical 8-piece set. Be well-prepared for every type of cylinder, from the outset. These eight tension wrenches are all made of high-quality steel and, thanks to their flexibility and hardness, these tensioners provide a very good feedback when picking locks. The varying shapes and lengths offer a wide range of possibilities for a successful opening. These tension tools are the perfect complement to our already "legendary" ELITE lock picks. 

Small box with tension pins, including main pin as an alternate for item 3130 (Multipick TNT-20-V3) 

Specially manufactured by ourselves to tackle the unusual properties of dimple pin tumbler locks. Also works with dimple pin cylinders made in the USA. Each individual dimple pin tensioner is made of high-quality spring steel and thus generates highly sensitive feedback.Specifications:1 x Tensioner with 1.2 mm thickness and 2.6 mm width 1 x Tensioner with 1.2 mm thickness and a conical width of 2.4 mm - 3.6 mm 1 x Tensioner with 1.5 mm thickness and 2.9 mm widthA Multipick product - Made in Germany 

SP-41 to SP-44 are small tension tools for different small locks as for example on letter boxes and locks with very narrow lock holes. A MUST for the professional equipment! 

Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers.This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Dimensions:Shank width: 3.0 mmThickness: 1.3 mm A product of Multipick "Made in Germany - Made in Bonn". 

This BoK tension wrench manufactured by us featuring a wedge-shaped tip expanding from 0.8 mm to 1.4 mm is a unique tool that provides a perfect plug coupling. Another advantage of this tapered turner is that it can be used in a greater number of keyways. Specifications:Tension handle (length): 76 mmTension handle (thickness): 1.4 mmTension handle (width): 3.0 mmWedge (length): 19 mm 

Especially designed for Multipick by Lock Noob to suit the special characteristics of a dimple lock. Also supports cylinders from North American manufacturers.This dimple lock tensioner is made from Multipick's well-known high quality spring steel  which ensures a sensitive feedback. Dimensions:Shank width: 2.5 mmThickness: 1.3 mm A product of Multipick "Made in Germany - Made in Bonn".