ARES Scales

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.4mm 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.1mm 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.8mm 

The graduations of the grid scales are identical to those of the items MOB-SK001 to MOB-SK004 (3.1mm / 3.4mm / 3.6mm and 3.8mm). In addition, the graduation is recognisable here by a "ring nut". This serves as a grid. The scales offer the advantage that the pick is always positioned in the grid dimension in the thrust axis. For this purpose, an additional pressure spring pin is screwed into the positioning ring. This comes with the tool and can be used if required. Through the modification, the user can concentrate on the rotary axis and the pick in order to set the pin. The slight disadvantage of this is that the liberty in the thrust axis is lost. This could be an issue in some cases. In this case, a scale without a grid would be advantageous. This scale corresponds to the graduation 3.6mm 

These scales are used when it comes to opening dimple locks. They are available in different graduations. The selection of a scale depends on the type of lock you want to open. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.6mm . 

This scale corresponds to the 4.0 mm graduation and is deployed to unlock dimple cylinders. The selection of the scale depends on the type of lock to be opened.Here you will find a corresponding table showing you which scale belongs to which cylinder profile.Operating instructions, e.g. for the ARES dimple opening system, can be found here.All available scales, additional individual components and all sets can be found in the ARES category. 

These scales are used when it comes to opening dimple locks. They are available in different graduations. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.1mm . 

These scales are used when it comes to opening dimple locks. They are available in different graduations. The selection of a scale depends on the type of lock you want to open. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.8mm . 

These scales are used when it comes to opening dimple locks. They are available in different graduations. The selection of a scale depends on the type of lock you want to open. We currently offer 4 different graduations: 3.1mm / 3.4mm / 3.6mm and 3.8mm. This scale corresponds to the graduation 3.4mm