Abus- XD25 ARES lock opening tool

With this extensive set, you have an extremely wide range of possibilities. Two basic modules and many different scales offer you a set that has never existed before. Even complex locks and cylinders can now be opened professionally by you in just a few steps. The all-inclusive set for your next task. Simple and practical, saves time and money. The included scales are used for the most common types of dimple as well as the most common types of disc disc detainer locks. They serve as a guide for positioning the setting tool above the pin or in the level of the disc to be set. Alternatively, you can palpate the pins or discs freely and then set them with the appropriate tool. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly. Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products. In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

Disc detainer locks are mainly padlocks and bicycle locks. The area of deployment is broad and can be found all over the world. With the ARES from Multipick and a little practice, you will be able to open almost any disc detainer lock. Furthermore, we offer common scales for Abus and Abloy. The difference is mainly in the graduation of 2mm (Abus, Abloy) and 1.6mm (Abloy). The scales are guides to make it easier to find the positions of the individual discs. The graduations already mentioned are the most widely used on the market. Of course, you can also use the scales for any other disc detainer lock. However, the graduation can then only be used as a reference. With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer locks. With this set you will be able to open even tough locks. The basic module offers you the possibility to modularly expand your system.  Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, as used in all our products. In order to achieve smooth running between the tensioning tool and the setting tool, a sliding sleeve has been integrated. A clear laser marking of the corresponding components ensures precise orientation during operation. More control can be achieved by individually screwing the handles included in the scope of delivery into the basic module. These are necessary in some cases, especially when using the drill recess version. Changing the individual components, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.  

TCS-B ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the TCS-B cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the TCS-B, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

Abus- D6XARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Abus- D6X cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Abus- D6X, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link. 

In this unique, 39-piece lock pick set, ambitious lock pickers will find a selection of the picks appreciated most by "Lock Noob" and which he uses on a daily basis. Besides the Abona and Monith rakes designed by "Lock Noob" himself, these are comprised of, without exception, 19 selected Multipick ELITE picks plus two ELITE dimple lock picks. 16 different Multipick ELITE tensioners, including 3 TOK tensioners, and 3 champion tensioners Chr. Holler and 3 dimple lock tensioners round off this rich, high-yield, high-quality set. Quality features:The ultimate lock-pick set in worldwide unrivalled high-tech quality.Finest pick tips - ingenious spring steel - perfect workmanshipHigh-quality individual design - perfection down to the last detailNo duplicate picks or tensioners100% Made in Germany - by Multipick, of courseThis elegant set is housed in a fold-out genuine leather case. - A "must have" for every "Lock Noob" fan! - 

The original Multipick jackknife pick set in a new EDC (Every Day Carry) version - small, handy, functional. We have further refined and improved our globally popular tool with new pick tips that you will only find here.Always at hand: For instance, the letterbox key has been lost, or an emergency situation in which access to a locked object is required, or a geocaching tour that requires a locked container to be opened, then comes our TMP to the rescue.The EDC pick sets contain a selection of different types of pick tips for different types of locking mechanisms. The casings of our TMPs are made from milled blocks of aluminium, which are anodised and finished with a special microfinish. A real eye-catcher with some clever functions and weighing just 26 grams. The individual picks are made of German high-grade steel, which is extremely tough but still offers the necessary flexibility. The milled metal body provides very high levels of torsional rigidity when picking locks. All picks and the integrated tensioner have been modified for picking in particularly narrow keyways. The gauge of the picks measures 0.5 mm. The integrated tensioner can be removed with a slight push and reinserted again equally easily. The individual picks are locked in place using a knurled screw on the top of the tool. A secure hold of the picks is therefore 100% guaranteed. With a very low net weight, this results in a sensitive picking process with a very firm grip.Another advantage of our development is the ability to change the pick tips within a very short time. All you have to do is loosen an Allen screw (2 mm). With the optionally available pick tips, you can put together your own customised pick kits. Be it for yourself, as a gift, for geocaching or for emergency services in all kinds of sectors, the original jackknife pick set from Multipick is simply a safe companion for any situation.This pocket knife pick set comes with the following picks:• MP3TPN31 - Hook# 5• MP3TPN75 - Lock Noob Abona Rake• MP3TPN79 - Facet - Short/Medium Hook• MP3TPN-DD02 - Full Diamond - Large• MP3TPN-D03 - Disc Turner• MP3TPN-UDEC - Ultra DecoderDimensions:• Length: 89 mm• Max. Height: 19.5 mm• Width: 6.6 mm Weight: 0.026 kg Tip: For successful lock picking practice, our practice locks offer a wide range of options for learning lock picking and/or developing or improving your skills. 

Abus- EC550 ARES opening tool - The ultimate opening tool for dimple pin-tumbler locks Dimple cylinders are widely used and can be found in many residential doors. With the Multipick ARES Opening System, we have succeeded in creating a revolution in the field of tools for dimple pin-tumbler systems. A tool that offers countless possibilities to open almost any dimple cylinder reliably and quickly with a bit of practice.The included scale in the scope of delivery is designed for the Abus- EC550 cylinder. It serves as an aid for positioning the pick above a pin. Alternatively, you can palpate the pins freely and then position them with the pick.In addition to the Abus- EC550, the basic module offers you the possibility to expand your system modularly.We are working specifically on further profile types for dimple pin-tumbler locks, disc locks and further extensions, such as for opening safes. You can find all components and accessories here..Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.In order to achieve smooth operation between the tensioning tool and the setting tool, a plain bearing designed specifically for this purpose has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. By individually attaching the included handle to the basic module, a stronger force can be applied during pretensioning (dimple locks) and, depending on the task, a better hold of the tool and better feel can be achieved when tensioning.Operating instructions and an overview in tabular form of our ARES sets and their corresponding profiles and scales can be found under this link.