Conversion Kit for Door Peephole Opener

The door-latch opening cards are made from a special plastic designed specifically for their intended use. They enable quick and easy opening of doors that are not locked. They are particularly useful in situations where the available working gap is too small for opening needles, allowing this card to show its strengths.Additional door-latch opening card sets in other thicknesses or combinations are also available in our shop. 

The New Door Peephole Opener Lockoff - Now Being Manufactured By MultipickFrom now on, the door peephole opener LockOff will be manufactured by Multipick in superior Multipick quality. However, we have kept the ingenious basic construction of the tool and simply reinforced the established weaknesses substantially. The Multipick LockOff has finally transitioned into a mature and durable tool, made in Germany.Thanks to its sophisticated system, this high-quality lever tool allows the opening of locked doors, whether single or double-rebated. It is particularly effective for opening self-locking doors. In our opinion, this opening tool should be a “must have” component of in the professional equipment carried by emergency key services.Operation: Before using this tool, you should find out which type of door handle is installed. Unfortunately, rotary door knobs are also not operable with this opening tool. First, the length of the LockOff  lever arm must be adjusted. To do this, it's necessary to re-adjust and fix the LockOff rod, adjusting it from the center of the peephole to a position in relation to its distance to the door handle. The angled lever arm rests on the inside door handle. The rubber stopper on its tip prevents damage in case it hits the door. The door handle can be operated by pressing on the outside arm. The calibration of the lever arm in front of the door is very important! If it's too short, the lever slips off the handle before it can be pressed down sufficiently. If it's too long, one cannot generate enough force to press the lever down. In case of misalignment, the inserted LockOff can easily be pulled out and re-adjusted. The door peephole can also be easily removed from the outside with the special cranked pliers; take care to prevent scratches when the pliers slide off onto the door panel. With the LockOff - Peephole Turbo-Helper developed by us, you can remove all standard door peepholes without causing any destructive damage, in no time at all. Simply clamp it into a drill or screwdriver and “unscrew” the peephole with the necessary counter-pressure.Going forward, we will be offering a cost-effective modification, or repair  of your old LockOff. at a fixed price. All components with proven vulnerabilities will be replaced by new Multipick components, giving you a more robust and durable tool, including free express return shipping.Images may differ from original. 

The 3.5 mm Door Handle Lasso Tool is a classic opening tool designed for non-destructive entry through slammed doors. Thanks to its slim diameter, it can be guided through the gap beneath the door to reach the interior door handle, which is then operated via the pull cord to depress the handle from the outside. This allows access without damaging the lock or the door. The tool works particularly well on doors with sufficient clearance at the bottom edge (approx. 4 mm or more), or in combination with methods used to create or widen the gap. In many cases, this simple technique provides the quickest solution for opening a door that has merely been slammed shut. Further developed in collaboration with locksmiths and authorities, this tool remains a proven and practical standard solution for professional users who regularly deal with slammed doors. Dimensions: Pull cord length: 156 cm Handle section length: 25 cm Cord attachment section length: 11.5 cm Lever section length: 113 cm  

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

The Emergency Set for Broken Latch is a practical tool set designed for professional use in cases of latch and bolt breakage. It enables targeted access to broken latches or bolts and allows controlled retraction, even when components are jammed or difficult to reach.After removing the door hardware, the latch can first be secured, for example using a door latch opening card. The inner square opening of the lock follower then serves as a precise centering guide for the hole saw, allowing the follower to be removed cleanly. The resulting access opening enables broken or blocked components to be safely retracted using the supplied stainless steel hooks. This method ensures controlled operation while minimizing unnecessary damage.The set is designed for reliable, structured workflows and supports efficient emergency interventions, particularly in cases of defective lock mechanisms.The set includes a 29 mm HSS bi-metal hole saw, three HSS drill bits (6.35 mm, 8.00 mm, and 10.00 mm) with special shanks for hole saw use, two stainless steel pointed hooks, and supplementary online instructions.