Lishi SIP22 -TL-AG Original Tool

This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for: Peugeot 

The latch opening cards are made from a type of plastic specifically created for their use. They allow a fast and easy opening of doors that are “only” closed, but not locked. Especially in cases where the gap between door and frame is too narrow for the use of latch pick needles these cards can prove their usefulness. 

This tool was developed for opening and decoding vehicle locks in a one-step operation.Developed for vehicle locks mentioned below, this tool features a special profile that enables targeted picking of each individual disc of the cylinder. Once successfully opened, the code can be read from the scale on the tool and a key can be produced. One tool, three functions: Tensioning, picking and decoding.Suitable for:Citroen C5 as of 2008, C8 as of 2002, Dispatch as of 2007, Jumpy as of 2007, Picasso as of 2004Peugot 207, 307, 308, 806 as of 2002, 807MAN Trucks with inner track closureMG Mini up to 2002 

This lock cracker breaks even cylinders only slightly projecting thanks to a powerful clamp which is acting from underneath. With this tool you may facilitate the cylinder cracking by inserting a special pulling screw into the cylinder which prevents the lock cracker from slipping off. You remove the tool head from the shaft, place and fix it on the cylinder. Then you screw a suitable special pulling screw into the cylinder, using a Torx 20 bit, 50 or 70 mm long (Article: 2128 + 2129). 

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left