High Performance Milling Burrs

The Plain Burr 50 mm from Soubertools is a milling burr specially designed for opening locks made of brass, steel and aluminium. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 8.0 mm d2: 3.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 12.0 mm d2: 3.0 mm I2: 80 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The Safe-End Burr 60 mm from Soubertools is a milling burr specially designed for opening locks made of steel. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Technical features:Material: Solid carbide Form: cylindrical d1: 6.0 mm I1: 16.0 mm d2: 6.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The Magi Burr 50 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services.Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 15.0 mm d2: 3.0 mm I2: 60 mm Toothing: crossed toothing for unsiversal useApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 22.0 mm d2: 3.0 mm I2: 50 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

The Magi Burr 60 mm from Soubertools is a milling burr specially designed for opening locks. The burr is made of carbide, which makes it very stable and allows it to be used for a long time. The Anti-Clog tooth design ensures perfect clearance of the shavings resulting in a precise and fine milling job. In addition, the Anti-Snatch design ensures that the milling cutter does not get jammed or possibly get twisted.  

Mini Milling Burrs enable the milling through the base protection of cylinder locks. This makes them perfectly adapted for locksmiths services. Technical features:Material: Solid carbide Form: cylindrical d1: 3.0 mm I1: 20.0 mm d2: 3.0 mm I2: 80 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

Technical features:Type: soldered Form: cylindrical d1: 8.0 mm I1: 18.0 mm d2: 6.0 mm I2: 64 mm Toothing: crossed toothing for unsiversal use Coating: noneApplication possibilities:     tough and high-strength materialalloyed steel casting synthetic material    universal usagehighest chip removalStrongly recommended for the following materials:BrassCopperCast ironBronzePure steelHardened steelStainless steelHigh-Grade steelTitan 

This solid carbide high-speed drill of the latest generation is made of 100% carbide. It is the top product for cylinder openings in record time, and distinguishes itself in a high durability. For best results use a milling machine. Even with a drilling machine or a cordless screwdriver this cutting burr gives conspicuous service. In connexion with our high performance grinding bits the user obtains an almost perfect and durable tool combination! With this drill the cylinder will be cut straight in very short time, no matter what kind of drilling protection you may find. Normally the cylinder should be possible to open by now. If it does not, you enlarge the existing whole sidewards with a grinding bit. Since this way of proceeding spares the tooth system of the grinding bit and besides is fast and efficient, we consider this combination of drill grinding bit and grinding bit as an ideal supplement.On top of our high performance cutting burrs a "must" for the equipment of every locksmith!Technical Data:Shaft-Ø: 6 mmLength: 60 mmCutting Length: 30 mm100% CarbideVery Long Durability