Square Bolt Knife 9 mm

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism. Normally this opening technique is only possible with simple fittings which are not screwed together. 

Lifter for security-fittings usually allow lifting of the security fitting in order to insert a square bolt knife into the gap and turn the handle mechanism. Normally this opening technique is only possible with simple fittings which are not screwed together. 

Opening-Set for single- and double-offset doorsEvery locksmith knows the problem of closed double-offset doors. The new ACE spiral needles, made of high quality spring steel, allow the non-destructive opening of double-offset doors in most cases. The use is very simple: The tool is inserted in the narrow gap between door and frame by turning until it makes contact with the latch. Continued turning pushes back the latch. Usually this process does not cause any damages except a pierced sealing strip. The set consists of four (4) different tools for doors with the lock mounted either on the right or on the left and 2 different material strengths (1.5 and 1.7 mm) for the different types of offset door designs. Of course, the ACE-tools are very well suited for opening simple offset doors as well!For very tightly engaging (closing) double and simple offset doors the ACE-Mini-Set (2 pieces) of only 1.25 mm needle-strength is especially suited. 

The popular panic door opener is now available as a set for door opening right and left. No difficult operation anymore thanks to the coverage of all opening directions. Practical and effective! For the opening of closed doors that open to the outside, single-offset doors, i.e. those that can be found in public buildings and emergency exits. In order to insert the tool into the gap between frame and door it is often necessary to broaden this gap using a suction cup or our Multi-Opener. Depending on the door, this application can require different techniques therefore it’s advisable to be prepared for all possibilities! Extending the door gap can accomplished e.g. with a strong siphon, door wedges or a door lever.Special:Spring steel blade, only 1mm thick. Also available individually33800 = Door use from the top right33805 = Door use from the top left  

The 3.5 mm Door Handle Lasso Tool is a classic opening tool designed for non-destructive entry through slammed doors. Thanks to its slim diameter, it can be guided through the gap beneath the door to reach the interior door handle, which is then operated via the pull cord to depress the handle from the outside. This allows access without damaging the lock or the door. The tool works particularly well on doors with sufficient clearance at the bottom edge (approx. 4 mm or more), or in combination with methods used to create or widen the gap. In many cases, this simple technique provides the quickest solution for opening a door that has merely been slammed shut. Further developed in collaboration with locksmiths and authorities, this tool remains a proven and practical standard solution for professional users who regularly deal with slammed doors. Dimensions: Pull cord length: 156 cm Handle section length: 25 cm Cord attachment section length: 11.5 cm Lever section length: 113 cm